Samsung SCV-2060 User Manual page 24

Operating Your Camera

If you set the Function Setup switch to 'AUTO' mode, You can adjust the brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)

Note that the higher the zoom level, the brighter the screen, but the more likely it is that an
after-image will appear.

Although Noise, Spots and Whitish symptoms may occur in SENS-UP operation when the
zoom level is increased, this is normal.
WHITE BAL (WHITE BALANCE)
Use the White Balance function to adjust the screen color.
1.
When the SETUP menu screen is displayed,
select 'White Bal' by using the Function
Setup switch so that the arrow indicates
'White Bal'.
2. Select a desired mode using the Function
Setup switch.
Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.
OUTDOOR : Select this when the color temperature is between 1,700˚K and
11,000˚K. (sodium light inclusion)
Select this when the color temperature of environment surrounding
the subject is out of the control range (e.g. clear sky, or sunset)
INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K.
MANUAL : Select this to fi ne-tune White Balance manually. Set White Balance fi rst
by using the ATW or AWC mode. After that switch to MANUAL mode,
fi ne-tune the White Balance and the Function Setup switch.
AWC SET : To fi nd the optimal luminance level for the current environment,

White Balance may not work properly under the following conditions. In this case select the
OUTDOOR mode.
When the ambient illumination of the subject is dim.
If the camera is directed towards a fl uorescent light or is installed in a place
where illumination changes dramatically, the White Balance operation may
become unstable.
24_ Operating Your Camera
point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW