Table of Contents
Advertisement
Chapter 2
Installing the Camera
1
Mounting to the Ceiling
You can connect the PTZ IP camera to the ceiling using the following accessories:
•
•
Connecting to the Pendant Pipe
Use these steps to mount the camera to the ceiling using a pendant pipe.
Determine a hard surface ceiling location, and use the alignment sticker to mark the positions where
Step 1
holes will be drilled to secure the pendant head.
Hammer the anchors into the ceiling.
Mounting holes should be 10 mm in diameter and 60 mm deep. Use M6.2 x75mm screws.
Note
OL-28954-01
2
5
C Mark
20cm Pendent Pipe with Adaptor Installed—CIVS-PA-EXT=
Pendant Head—CIVS-6KA-PENHEAD=
3
4
4
Alignment Mark
Cisco Video Surveillance PTZ IP Camera Installation Guide
Installing the PTZ IP Camera
6
2-9
Advertisement
Table of Contents
