Viewing Live Video
Table 4-4
Control
Audio Control
The following settings are accessible from the main Camera Video & Control window:
•
•
•
•
Camera Settings
The controls in
image.
Table 4-5
Control
Picture Adjustments
Brightness slider
Contrast slider
Cisco Video Surveillance PTZ IP Camera Installation Guide
4-6
Camera Video & Control Window Controls (continued)
Description
Displays the controls for audio when you enable audio. Controls are greyed
out when audio is disabled. To enable audio:
Click on the Setup link and select Streaming.
•
From the Audio section of the Streaming page, check the Enable Audio
•
box.
Click Save.
•
Use these controls to enable or disable the speaker and microphone. Use the
sliders to adjust the volume.
Camera Settings, page 4-6
Motion Detection Settings, page 4-9
Pan/Tilt/Zoom Settings, page 4-10
Privacy Zone, page 4-12
Table 4-5
appear when you click the Up Arrow next to Camera Settings under the video
Camera Settings
Description
To control the brightness of the video image, drag the slider.
Values are 1 through 10. A higher value increases the brightness
and a lower value decreases the brightness. For example, if the
PTZ IP camera is facing a bright light and the video appears too
dark, you can increase the brightness.
The default value is 5.
To control contrast of the video image, drag the slider. Values are
1 through 10. A higher value increases the contrast and a lower
value decreases the contrast.
The default value is 5.
Chapter 4
Managing the Camera
OL-28954-01