Chapter 3 Performing The Initial Setup Of The Ip Camera - Cisco PTZ Installation Manual

Video surveillance ip camera
Table of Contents

Advertisement

Performing the Initial Setup of the IP Camera
After you install the PTZ IP camera as described in the
perform a factory reset procedure, you must access the PTZ IP camera and make initial configuration
settings. These settings include administrator and root passwords, and whether the PTZ IP camera can
be accessed through an HTTP connection in addition to the default HTTPS (HTTP secure) connection.
To make these configuration settings, you connect to the PTZ IP camera from any PC that is on the same
network as the PTZ IP camera. The PC must meet these requirements:
Operating system—Microsoft Windows 7 (32-bit and 64-bit)
Browser—Internet Explorer 8.0 (32-bit only)
In addition, you must know the IP address and default login credentials of the PTZ IP camera. By default,
when the PTZ IP camera powers on, it attempts to obtain an IP address from a DHCP server in your
network. If the camera cannot obtain an IP address through DCHP within 90 seconds, it uses a default
IP address of 192.168.0.100. The default login credentials (Username/Password) are admin/admin.
To connect to the PTZ IP camera for the first time and make initial configuration settings, perform the
following steps. You can change these configuration settings in the future as described in the Cisco
Video Surveillance PTZ IP Camera Configuration Guide.
Before you Begin
The Microsoft .NET Framework version 2.0 or later must be installed on the PC that you use to connect
to the PTZ IP camera. You can download the .NET Framework from the Microsoft website.
Procedure
Start Internet Explorer, enter HTTPS://ip_address in the address field, and press Enter.
Step 1
Replace ip_address with the IP address that the PTZ IP camera obtained through DHCP or, if the camera
was unable to obtain this IP address, enter 192.168.0.100.
The Login window appears.
Enter the default login credentials:
Step 2
Username: admin
Password: admin
The Initialization window appears.
OL-28954-01
C H A P T E R
Chapter 2, "Installing the Camera,"
Cisco Video Surveillance PTZ IP Camera Installation Guide
3
or after you
3-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

283028356930

Table of Contents