Download Table of Contents Print this page

Using Telnet To Finish The Configuration - Bosch Conettix ITS-D6682-INTL Installation Manual


Table of Contents
Conettix ITS-D6682-INTL | Installation Guide | 3.0 Configuring and Programming the D6682
Using Telnet to Finish the
Although the screen shots are specific
to Windows 2000, they are similar for
Windows XP and Vista.
In Windows Vista, Telnet is disabled by
default. In order to use Telnet, you must
enable it:
1. Click Start→Control
2. Click Turn Windows features on
or off.
If you are prompted for an
administrator password or
confirmation, type the password or
provide confirmation.
3. In the Windows Features dialog
box, select the Telnet Client check
4. Click OK.
The installation might take several
To use Telnet, you must log in as a user
with Administrative privileges.
This example uses the IP address of and the MAC Address of
To complete the IP address configuration of the
D6682, launch a telnet session:
5. Select Start
Run to open an MS-DOS
6. Type telnet and click OK.
Bosch Security Systems, Inc. | 2/09 | F01U126778-01
A DOS window appears:
The colors are inverted here for clarity. The
normal prompt window appears with white
text on black.
7. At the C:\> prompt, type telnet and press
8. At the Microsoft Telnet> prompt, type open
(space) IP Address (space) Port Number.
Figure 7:Command Prompt - telnet
Example: open 1
The connection fails the first time. This is
9. Press [F3] to show the last line typed.
10. Backspace over the port value and change it
to 9999.
Figure 8: Port Value Change
Example: open 9999
11. Press [ENTER].


Table of Contents

This manual is also suitable for:

Conettix its-d6682-ul

Table of Contents