Ending A Call - Cisco 7975G Software Manual

If you want to...
Answer a call on your
cellular phone or other
remote destination
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.

Ending a Call

To end a call, simply hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while using a headset
Hang up while using the speakerphone Press
Hang up one call, but preserve another
call on the same line
Cisco Unified IP Phone 7975G Phone Guide for Cisco Unified Communications Manager 6.1(3) (SCCP and SIP)
Then...
Set up Mobile Connect and answer your
phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on your
desktop phone, the remote
destinations stop ringing, are
disconnected, and display a missed
call message.
• When you answer the call on one
remote destination, the other remote
destinations stop ringing, are
disconnected, and a missed call
message is shown on the other
remote destinations.
Then...
Return the handset to its cradle. Or press EndCall.
Press
Press EndCall. If necessary, remove the call from hold first.
For more information, see...
Using Cisco Extension
Mobility, page 46
. Or, to keep headset mode active, press EndCall.
or EndCall.
23