Cisco 7975G Software Manual page 78

If you want to...
Add a new remote
destination
70
Then do this after you log in...
1. Choose User Options > Mobility Settings > Remote Destinations.
2. Select the device from the Name drop-down list box.
3. Click Remote Destinations.
4. Click Add New.
5. Enter the following information:
Name—Enter a name for the cellular (or other) phone.
–
Destination Number—Enter your cellular phone number.
–
Answer Too Soon Timer—Enter the amount of time before you can
–
pick up a call on the remote destination (in milliseconds).
Answer Too Late Timer—Enter the amount of time after which it is
–
too late to pick up a call on the remote destination (in milliseconds).
Delay Before Ringing Timer—Enter the amount of time before the
–
call rings on the remote destination (in milliseconds).
Remote Destination Profile—Select a remote destination profile,
–
which contains the settings that apply to all of your remote
destinations.
Allowed Access List—Select a phone number or rule that allows your
–
cellular phone to ring when a call comes in to your desktop phone.
You can select an allowed access list or blocked access list, but not
both.
Blocked Access List—Select a phone number or rule for which your
–
cellular phone does not ring when a call comes in to your desktop
phone. You can select an allowed access list or blocked access list,
but not both.
Mobile Phone—Select to allow your cellular phone can accept a call
–
sent from your desktop phone.
Enable Mobile Connect—Select to allow your cellular phone to ring
–
simultaneously with your desktop phone.
Smart Client Installed—Select to indicate that the remote destination
–
you are setting up is a smartphone.
6. Click Save.
OL-17710-01