Choosing Touchscreen Items; Cleaning And Maintaining The Touchscreen - Cisco 7975G Software Manual

Choosing Touchscreen Items

There are three ways to choose items on your phone's touchscreen.
To choose a
touchscreen item...
By touch
By item number
By scrolling

Cleaning and Maintaining the Touchscreen

You can use the Display button
illuminates to indicate changes in touchscreen status:
Green, steady—Touchscreen is in sleep mode
Green, flashing—Touchscreen is disabled
If you want to...
Disable the touchscreen
for cleaning
Enable the touchscreen
(after disabling it)
Wake the touchscreen
from sleep mode
Caution Use only a soft, dry cloth to wipe the touchscreen. Do not use any liquids or powders on
the phone, as they can contaminate phone components and cause failures.
14
Do this...
Press (or tap) touch-sensitive items on the touchscreen with your fingertip.
Use only your fingertip to press the touchscreen, as using any other objects
could damage the display. Be aware that pressing a phone number can cause the
phone to dial the number.
Press the corresponding number on your keypad. For example, press 4 to
choose the fourth item in a menu.
Use the Navigation button to highlight an item. Press the Select button to select
the item, or a softkey to finish the action.
to disable and enable the touchscreen. The Display button
Then...
Press and hold for more than one second.
The screen remains disabled for about a minute, unless you enable it.
Press (flashing) and hold for more than one second.
Press the touchscreen or any button, or lift the handset.
After a period of inactivity (determined by your system administrator),
the touchscreen enters sleep mode to save power. In this mode, the
touchscreen appears blank and the Display button
flashes.
remains lit.
OL-17710-01