Oce CS2024 Quick Start Manual page 36

Loading Roll Media
When preparation for feeding roll media is finished, Online is displayed and the
printer is ready to print.
Attention: You must select the setting for Media Type that matches the media
loaded in the printer. If the setting does not match the type of media loaded in the
printer, this will cause the quality of printing to deteriorate.
Press [ ] or [ ] to select the setting for the length of roll media then press the OK
17.
button.
[84]
Roll Length Set
30.0m
When the preparation of the roll media feeding finishes, Online is displayed and the
printer is ready to print.
Attention: The output assists guides should always be extended for printing. If
they are not extended, this could lead to poor print quality.
Pull out the output assist guides.
18.
[85]
36 Chapter 1 Read this first