Weider 245 Bench User Manual page 7

Uk manual
Hide thumbs Also See for 245 Bench:
Table of Contents

Advertisement

3. Attach the Front Leg (2) to the Stabilizer (3) with
two M10 x 58mm Carriage Bolts (74) and two
M10 Black Nylon Locknuts (66).
4. Attach the Front Leg (2) to the Frame (1) with two
M10 x 60mm Bolts (57), two M10 x 55mm Bolts
(59), six M10 Black Washers (64), and four M10
Black Nylon Locknuts (66).
5. Apply some of the included grease to an
M10 x 70mm Bolt (71). Attach the Frame (1) to
the upper set of holes in the bracket on the
Crossbar (12) with the Bolt and an M10 Black
Nylon Locknut (66). Then, tighten the Frame
Knob (37) into the bracket on the Crossbar (12)
and the Frame (1).
See the inset drawing. Insert the Crossbar Pin
(29) into the lower set of holes in the Crossbar
(12). Attach the Crossbar Pin to the Crossbar with
an M4 x 16mm Self-tapping Screw (75).
6. Orient the Support Bar (17) with the pins facing
downward as shown. Set the Support Bar in one
of the sets of brackets on the Left and Right
Uprights (6, 7).
3
66
3
74
4
64
64
66
2
64
5
66
1
Bracket
6
7
Pin
Bracket
7
2
66
66
1
59
57
37
12
71
12
29
17
6
Pin
Bracket
75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

245Weevbe3296.0

Table of Contents