Ariston GENUS HE 35 Plus Installation And Servicing Instrucnion page 10

10
Programme ON or OFF with the "
" "= OFF; " "= ON
Enter the hour using "h"
Enter the minutes using "m"
If a switching command is to be carried out every day (1 2 3 4 5 6
7) then store using the "
be carried out by using the "Day" key.
When the day seIection is left bIank, the programmed switching
instruction operates at the
1 2 3 4 5 6 = Monday – Saturday
1 2 3 4 5 = Monday – Friday
6 7 =Saturday – Sunday
Selection of single days: 1 = Mon. .............. 2 =Tues.
Save the switching time with the "
The time switch enters the automatic operating mode and displays
the current time of day.
Begin any further entry of a switching time with the "Prog" switch. If
your entry is incomplete, the segments not yet selected will blink in
the display. After programming is completed, and you return the
time clock to the current time display with the "
clock will not activate any switching instruction required for the
current time. You may need to manually select the desired
switching state with the "
encounters further switching instructions in the memory in real time,
it will correctly activate all subsequent switching instructions.
Manual Override Switch "
With the " " you can change the current setting at any time. The
switching program already entered is not altered.
Reading the programmed switching times
Pressing the "Prog" key displays the programmed switching times until
the first free memory location appears in the display "– – : – –".
If you now press the "Prog" key once again, the number of free memory
Iocations will be displayed, e.g. "18". If all memory locations are
occupied, the display "00" appears.
Changing the programmed switching times
Press the "Prog" key repeatedly until the switching time you want to
change is displayed. You can now enter the new data. See point
"Entering the switching times".
Notes on storing switching times:
If you end your entry of the switching times by pressing the "Prog" key,
then the switching time you have entered will be stored and the next
memory location displayed.
In addition, a complete switching command is stored automatically
after around 90 seconds provided no other key is pressed. The time
switch then enters the automatic operating mode and displays the
current time again.
Deleting individual switching times
Press the "Prog" key repeatedly until the switching time you wish to
delete is shown in the display. Then set to "– –" using the "h" or "m" key
and keep the " " key pressed down for around 3 seconds. The
switching time is now erased and the current time is displayed.
AM / PM time display
If you press the "+/-1h" and "h" keys at the same time, the time display
switches into the AM/PM mode.
" key:
" key, otherwise select the day(s) it is to
same time every day
" key.
" key, the time
" key. Thereafter, as the unit
"