Connectivity; Flight Mode - miCoach SMART RUN User Manual

If you attempt to start a workout while syncing, the pro-
gress overlay is shown.
The status bar sync icon blinks during syncing. The blink
frequency is 0.7 seconds shown and 0.3 seconds hidden.
If WLAN isn't available, you'll see an error message and
feel a 2-second vibration.
If this happens, review your miCoach SMART RUN WLAN
settings (see section 4.4.2.2).

4.4.2 Connectivity

In this section, you'll learn more about fl ight mode, WLAN, and Bluetooth
connectivity.

4.4.2.1 Flight mode

Flight mode disables your miCoach SMART RUN's wireless features to reduce
potential interference with aircraft operation and other electrical equipment.
This includes WLAN, GPS, and Bluetooth
To turn the fl ight mode on, tap on "Flight mode." Once fl ight mode is activated,
the circle next to the menu item will turn green. Flight mode is also indicated
with a small icon on the top status bar (see status icon overview in section 3.2).
When fl ight mode is activated, no WLAN or Bluetooth
GPS reception is turned off.
You won't be able to use any features that depend on these signals, such as star-
ting a workout with GPS sensors, syncing your workouts or profi le through WLAN
to miCoach.com, etc. If allowed by the aircraft operator and applicable laws and
regulations, you can use your miCoach SMART RUN without these functions.
On the screen, both WLAN and Bluetooth
during fl ight mode and can't be accessed.
functionality.
®
signals are emitted and
®
menu items will be shown as inactive
®
57
®