Overview Of Caption Programming Using The Keypad And Character Table - Olivetti ECR 8100 User Manual

O C
VERVIEW OF APTION
U K
SING THE EYPAD AND
T
ABLE
In PRG mode, press the
see the entity for which you want to program a caption,
displayed in this order:
1. PLU items: up to 1,500 PLU item names each a
maximum of 16 characters in length.
2. Departments: up to 99 department names each a
maximum of 12 characters in length.
3. Department groups (merchandise categories): up to
10 names each a maximum of 12 characters in
length.
4. Clerks: up to 15 names each a maximum of 24
characters in length.
5. Receipt headers: up to 10 lines each a maximum of
24 characters in length.
6. Receipt footers: up to 10 lines each a maximum of
24 characters in length.
7. Foreign currencies: up to 4 identifiers each a
maximum of 10 characters in length.
8. Payment media: up to 5 identifiers each a maximum
12 characters in length.
9. Divided payment and Extra invoice caption for
printing on invoices: up to 5 lines each a maximum
of 24 characters in length.
10. New language entry captions: up to up to 47
language captions each a maximum of 24
characters in length.
11. New language entry captions: up to 116 language
captions each a maximum of 10 characters in
length.
12. Restaurant ABR message (optional) printed after
invoice is issued: up to 7 lines each a maximum of
24 characters in length.
Use the keypad to enter non-accented capital letters
and the Character Table to enter small letters, accented
capital and small letters, special characters or symbols.
Using the Keypad
To use the keypad to enter capital non-accented caption
letters, locate the letter wanted on the cash register's
keypad and press its associated key (the letter will be
displayed on the far right-hand side of the display).
•
To give a determinate character a double width
attribute, press
character key.
•
To enter a space between characters, press
.
•
If the same key has to be used for successive letters of
a caption, press between the two letters.
P
ROGRAMMING
C
HARACTER
key repeatedly until you
before pressing the related
•
Any incorrect character can be canceled by pressing
which provides the typical backspace function
of the PC environment.
•
To toggle between capital letter ON/OFF, press
.
•
To skip directly to a determinate record number (for
example, to skip to Department number 4) type the
record number using the numeric keypad and then
press .
•
Confirm your final caption by pressing
Example: Enter the word BOOKS.
Type/Press:
NOTE: To abort a partially entered programming
sequence, you can use the
key.
Using the Character Table
The Character Table provides all the letters and symbols
that your cash register is capable of printing. With
reference to figure 7, the Character Table is divided into
two parts: one identified with "CAPS" at the top left-
hand corner and to be used with the CAPS mode
activated, the other identified with "Non CAPS" to be
used with the CAPS mode deactivated.
•
To toggle the cash register between the CAPS and
Non CAPS mode, press
register is in the CAPS mode, a line is displayed on the
far left-hand side of the display.
To use the character table:
•
First look for the letter or symbol wanted and then
identify its corresponding letter listed in the first
column on the left.
•
Switch the cash register to the CAPS or Non CAPS
mode depending in which part of the table the letter
or symbol you want is located.
•
Press the letter key on the keypad the number of
times necessary to select the character, as indicated
by the corresponding number on the row at the top
of the table.
•
Confirm your final caption by pressing
NOTE: Special accented national letters are not
displayed.
.
. When the cash
.
11