Rule Setup Menu - Bosch VG4-200 User Manual

VG4 AutoDome Modular Camera System
2.8

Rule Setup Menu

The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an
existing rule. The default setting is Empty.
Menu items marked with the ‡ symbol are available only with VG4 Pressure Domes.
NOTICE! You can program a total of twelve rules. You must define the inputs and outputs
i
before you program a rule. See Section 2.7 Alarm I/O Setup, Page 16, to configure alarm inputs
and outputs.
Exit...
1. Rule 1
2. Rule 2
3. Rule 3
4. Rule 4
5. Rule 5
6. Rule 6
7. Rule 7
8. Rule 8
9. Rule 9
10. Rule 10
11. Rule 11
12. Rule 12
4. Rule 4
Rule Setup Menu Choices
Menu
Exit
Rule 1-12
Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows
you to configure a rule from previously defined alarm inputs and outputs. Once an alarm is
configured with valid inputs and outputs, it can be turned on or off (enabled or disabled)
through its configuration menu.
Bosch Security Systems, Inc.
Rule Setup...
Enabled
Disabled
Invalid
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Focus / Iris: Select
Description
Saves and exits the
menu.
Displays the status
of a rule on the
right side of the
menu. There are
four (4) possible
rule statuses.
User's Manual
On-Screen Display Menu Navigation | en
Rule 1
Exit...
Enabled
Input:
Low Pressure‡
NONE
NONE
NONE
Output:
OSD
Shot 2
Alarm Relay
NONE
Right / Left: Select Period Time
Focus / Iris: Select Type
Sub-menu / Description
Enabled: The rule inputs and outputs are
properly defined and the rule is turned on.
Disabled: The rule inputs and outputs are
defined but the rule is turned off.
Invalid: The rule has a missing or invalid
input or output.
Empty: The rule has no inputs or outputs
defined.
YES
2 sec
Default
Setting
Empty
F.01U.133.267 | 6.0 (IP4) | 2009.06
19