Table of Contents
Advertisement
13. Untie and discard the wire tie on the Wire
Harness (60).
While a second person holds the Console (33)
near the Upright (5), connect the wires on the
Console to the Wire Harness (60) and to the
Sensor Wires (34).
Insert the excess wire into the Console (33) or
into the Upright (5).
Tip: Avoid pinching the wires. Attach the
Console (33) to the Upright (5) with four M4 x
16mm Screws (93).
14. Attach the Front Upright Cover (25) by pressing
the tabs on the Front Upright Cover into the Rear
Upright Cover (24).
13
33
60
14
24
12
Avoid pinching
the wires
34
5
93
25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 405 Ce Elliptical and is the answer not in the manual?
Questions and answers
The screen will not turn off after we quit exercising
The screen on the Pro-Form 405 Ce Elliptical may not turn off after exercising if the pedals are still moving or if buttons on the console are still being pressed. The console turns off automatically only if the pedals do not move for several minutes and no buttons are pressed.
This answer is automatically generated