Standard Controls; Boot Messaging - Bosch MIC400 PTZ Installation And Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

MIC400 Series Camera | Installation and Operation Manual

MIC-USB485CVTR and Universal Camset Software Installation

Universal Camset comes with WHQL certified drivers for the MIC-USB485CVTR

that must be installed prior to connecting the converter to the PC.

To install the drivers please do the following:-

1. Locate the

USB DRIVERS.EXE

click to begin and follow the on screen instructions to install; these are the

required drivers for using the MIC-USB485CTR.

2. Locate the

CAMSET INSTALLER.MSI

follow the on screen instructions to install.

3. Once installed a Universal Camset Icon will appear on your PC Desktop.

4. When opened the Universal Camset will display the Standard Controls

Tab as shown overleaf.

Providing the USB drivers have been installed successfully, you can then plug the

MIC-USB485CVTR into a PC via the USB port. If your converter is being plugged

in for the first time your system should recognise the device and inform you that

the hardware has been installed successfully.

The MIC-USB485CVTR should appear in the Comm Port selection list as USB and

as a virtual Comm Port, e.g "comm2" (for legacy support). Universal Camset has

been optimised to work with this converter in USB mode; therefore users should

select "USB" for maximum functionality and reliability.

The MIC-USB485CVTR has a status LED indicating its current state, by sending a

manual command e.g. Left or Right, you should see the LED flash. Transmitted

data from the converter is indicated by a

data a

green

LED will flash.

Bosch Security Systems

in the Universal Camset Folder, double

and then double click to begin,

red

flashing LED flash and upon receiving

Issue 1

Commissioning the MIC400 through Universal Camset

Universal Camset is a Windows PC based configuration software from BOSCH

Group; it is issued free on the CD that comes with each MIC camera. Universal

Camset supersedes all previous versions of Camsets used.