Controls - Bosch NDN-932 Installation Manual

FLEXIDOME HD
5.6

Controls

1. Indication LEDs
2. Menu button
3. Reset button
4. MicroSD card slot
Bosch Security Systems
The bi-colored LED indicates a failure
(red), normal operation (green) or an
established connection (green
flashing). It can be disabled in the
installer menu.
The menu button is used to start the
installation wizard.
Restores the default IP address or
restores a previous version of the
firmware if uploading a new version
fails. With the power on, use a small
pointed object to press and hold the
reset button for more than 10
seconds to restore the factory
defaults.
Insert a microSD card into the slot.
Installation Manual
Installation | en
AM18-Q0615 | v1.0 | 2012.10
29