Standard Specifications - Bosch DINION IP 7000 HD NBN-71022 Installation Manual

Hide thumbs Also See for DINION IP 7000 HD NBN-71022:
Table of Contents

Advertisement

DINION IP 7000 HD
11.4

Standard specifications

Audio streaming
Audio Streaming
Signal-to-noise ratio > 50 dB
Audio compression
Input/output
Analog video out
Analog video aspect
ratio
Audio
Alarm
Relay
Data port
Bosch Security Systems
connector
signal line in
signal line out
connector
activation
voltage
connector
voltage
Full duplex / half duplex
AAC-LC, G.711, L16 (live and recording)
CVBS (PAL/NTSC), 1 Vpp, SMB, 75 Ohm
(surge protected)
4:3 letterbox, 4:3 cropped, or 16:9 mode
1 x mono line in, 1 x mono line out
3.5 mm stereo jack
12 kOhm typical, 1 Vrms max
1 Vrms at 1.5 kOhm typical,
2 inputs
Clamp (non-isolated closing contact)
+5 VDC to +40 VDC
(+3.3 VDC with DC-coupled 22 kOhm
pull-up resistor)
1 output
Clamp
30 VAC or +40 VDC
Maximum 0.5 A continuous, 10VA
RS‑232/422/485
Technical data | en
2014.04 | v1.0 | AM18-Q0674
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dinion ip 7000 hdnbn-71013Nbn-71013

Table of Contents