Ltc 8600 Series Or Ltc 8800 Series Video Input Terminations; Ltc 8802 Series Monitor Expansion Bay Video Input Connections - Bosch LTC 8600 Instruction Manual

32 | en
8.6.1

LTC 8600 Series or LTC 8800 Series Video Input Terminations

8.6.2

LTC 8802 Series Monitor Expansion Bay Video Input Connections

IMPORTANT
Bosch Security Systems, Inc.
Each VIM card for an LTC 8600 Series or an LTC 8800 Series system has DIP
switches for selecting the termination of each individual video line. To terminate an
input line, make sure that the appropriate DIP switch on the VIM card is ON. If non-
terminated operation is required for looping purposes, turn the switch OFF (Switch
1 corresponds to the first video input channel of the card).
If looping video inputs are desired, the LTC 8600 Series and the LTC 8800 Series
systems may utilize the LTC 8808/00 Video Interconnect Panel. Both bays provide
video looping connections which interface to the LTC 8808/00 using coax type rib-
bon cables supplied with the patch panel. Each LTC 8808/00 provides looping capa-
bility for up to 32 video inputs.
If an LTC 8802 Series monitor expansion bay is supplied, each video input signal
that is connected to the LTC 8801 Series main CPU bay must also be connected to
the same numbered input on the monitor expansion bay.
With the LTC 8802 Series monitor expansion bay, ribbon cable connectors are pro-
vided for the video inputs. Video is to be looped from the main bay into the expan-
sion bay through 16 LTC 8809/00 ribbon cables. Connect all LTC 8809/00 ribbon
cables from the appropriate "VIDEO" ribbon cable connector on the main bay to the
corresponding "VIDEO" ribbon cable connector on the monitor expansion bay. The
ribbon cable connectors contain a small "key" protrusion formed into one side of
the connector to assure proper placement into the mating connectors. Be careful
not to force the cables into the mating connectors backwards.
The Termination DIP switches on the VIM cards installed in the main bay must be
turned OFF. This will make the main bay inputs non-terminated, and the expansion
bay will provide the termination for the video inputs.
VIDEO
KEYBOARD
OUT
CONSOLE
INPUT 161-176
1 2 13 1
ALARM
LOOP 161-176
14 2
3 4
PRINTER
INPUT 177-192
15 3
5 6
LOOP 177-192
SDA
16 4
INPUT 193-208
7 8
COMM PORT 1
17 5
LOOP 193-208
INPUT 209-224
32 25 18 6
COMM PORT 2
LOOP 209-224
26
SYNC 19 7
INPUT 225-240
27
20 8
LOOP 225-240
28 21 9
INPUT 241-256
29 22 10
LOOP 241-256
30 23 11
LTC 8801
31 24 12
VIDEO
KEYBOARD
OUT
CONSOLE
INPUT 161-176
13 1
1 2
LOOP 161-176
14 2
3 4
INPUT 177-192
15 3
5 6 LOOP 177-192
16 4
INPUT 193-208
7 8
17 5 LOOP 193-208
INPUT 209-224
COM
32 25 18 6
COMM PORT 2
LOOP 209-224
26
SYNC
19 7
INPUT 225-240
27
20 8
LOOP 225-240
28 21 9
INPUT 241-256
29 22 10
LOOP 241-256
30 23 11
LTC 8802
31 24 12
Figure 9: Typical LTC 8809/00 Cable Connections
Instruction Manual
VIDEO IN
8 7 6 4 3 2
5 1
LOOP 1-16
16 15 14 13 LOOP 17-32 12 11 10 9
LOOP 33-48
24 23 22 21 20 19 18 17
LOOP 49-64
32 31 30 28 27 26
29 25
LOOP 65-80
39 38 35 34
40 37 36 33
LOOP 81-96
47 46 43 42
48 45 44 41
INPUT 97-112
55 54 51 50
56 53 52 49
LOOP 97-112
63 62 58
64 61 60 59 57
INPUT 113-128
70 LOOP 113-128 66
72 71 69 68 67 65
INPUT 129-144
79 78 75 74
80 77 76 73
LOOP 129-144
87 86 83 82
88 85 84 81
INPUT 145-160
95 94 91 90
96 93 92 89
LOOP 145-160
VIDEO IN
6 2
8 7 5 4 3 1
LOOP 1-16
16 15 14 13 LOOP 17-32 12 11 10 9
LOOP 33-48
23 22 19 18
24 21 20 17
LOOP 49-64
30 26
32 31 29 28 27 25
LOOP 65-80
40 39 38 36 35 34
37 33
LOOP 81-96
48 47 46 45 44 43 42 41
INPUT 97-112
56 55 54 53 52 51 50 49
LOOP 97-112
64 63 62 61 60 59 58 57
INPUT 113-128
LOOP 113-128
72 71 70 69 68 67 66 65
INPUT 129-144
80 79 78 77 76 75 74 73
LOOP 129-144
88 87 86 85 84 83 82 81
INPUT 145-160
96 95 94 93 92 91 90 89
LOOP 145-160
LTC 8600 | LTC 8800 Series
LTC 8809/00
F.01U.127.393 | 2.0 | 2009.03