Bosch LTC 8600 Instruction Manual page 18

12 | en
Bosch Security Systems, Inc.
system parameters, program camera sequences, install lockouts, and access the
advanced alarm handling screens with speed and efficiency. The programmed infor-
mation may then be transferred into the Allegiant system, stored on disk, or printed
from a PC.
The LTC 8850/00 Bosch GUI Software is designed around an intuitive graphic-based
interface. This software provides high performance programming, control, and mon-
itoring of all system functions by using on-screen icons to reflect real time status of
the devices controlled by the system.
The LTC 8850/00 GUI Software also provides the ability to monitor system status
events. System alarms, switching functions, sequence events, and keyboard
actions, and video loss information can be viewed in real time on the PC screen and,
if desired, logged to the PC hard drive. The LTC 8850/00 GUI Software can also be
used to enable a special on-screen icon for identifying controllable cameras.
The CPU inside these matrix switchers supports powerful macro capabilities. The
macros can be activated using system keyboards, system time event functions,
alarm activations, and via special function icons in the LTC 8850/00 GUI Software.
These systems can serve as the master switcher in a SatelliteSwitch configuration.
This innovative feature enables a single master Allegiant system to communicate
with remotely located "Satellite" systems. Any Allegiant system model can serve as a
remote Satellite switcher. This powerful feature permits the design of a distributed
matrix video switching system with control at one central location and individual
control at the local sites. The main control site can view/control local cameras plus
cameras located at any of the remotely distributed Satellite sites. The Satellite sites
can view/control only cameras associated with their own site.
Instruction Manual
LTC 8600 | LTC 8800 Series
F.01U.127.393 | 2.0 | 2009.03