Lock Or Unlock Control Of A Monitor; Recording A Camera Pre-Position Scene; Recalling A Camera Pre-Position Scene; Activate/Deactivate Auxiliary Function - Bosch LTC 8600 Instruction Manual

64 | en

17.4.3 Lock or Unlock Control of a Monitor

17.4.4 Recording a Camera Pre-position Scene

NOTE

17.4.5 Recalling a Camera Pre-position Scene

17.4.6 Activate/Deactivate Auxiliary Function

Bosch Security Systems, Inc.
When using IntuiKey keyboards, press [Device Lockout], located on the main
•
Allegiant menu screen for these options.
With LTC 8555 Series keyboards, press [Monitor], [Lock], then [ON] to lock a mon-
•
itor or [OFF] to unlock the monitor. If the monitor to be unlocked is not the one
currently being controlled by the keyboard, enter the monitor number (but do
not press [Enter]) after you press [Monitor].
If the Status option is enabled, the section of the on-screen overlay between the
camera number and the time shows
prevents other operators from changing the video on the monitor being used
(unless they have a higher priority). Remember to unlock the monitor when finished
so other operators can access it. If an operator with a higher priority accesses a
locked monitor and switches to a different camera, the lock is automatically
removed.
Select a camera with pan/tilt/zoom control and with preposition options. Using the
joystick and lens controls, adjust the camera to view the scene you wish to store.
When using IntuiKey keyboards, press [Camera Control], located on the main Alle-
giant menu screen to enter a menu screen with this option. Press Set Shot [Set], then
select the scene number via the numeric keypad, and press [Enter]. The camera
position is stored for recall later.
If an AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
If an Allegiant conventional receiver/driver is being controlled, the pan/tilt and
zoom lens must have the necessary options for pre-position operation. On certain
models of AutoDomes and Allegiant Receiver/Driver Series, it is possible to disable
a previously stored pre-position, or remove it from a pre-position tour, by pressing
Set Shot [Set], the digit 9, followed by the 2-digit pre-position number. Refer to infor-
mation supplied with the device to determine if it supports this feature.
Alarm activations are defaulted to call preposition scene 16.
Select the camera to be activated. Press [Shot], enter a previously stored camera
position number via the numeric keypad, then press [Enter]. The camera automati-
cally returns to the previously stored position. If a second pre-position is called
prior to the completion of the first, the camera will move directly to the second
shot.
If the AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
When using IntuiKey keyboards, press [Camera Control], on the main Allegiant menu
screen to enter a menu containing these options. To turn on an auxiliary function of
a remote camera device, press Aux ON [ON], enter the number of the auxiliary you
would like to activate and then press [Enter]. Holding the [Enter] key down causes the
auxiliary function to be sent repeatedly. This capability is useful when the auxiliary
is activating a housing window washer function, or a temporary light source.
To turn OFF an auxiliary function of a remote camera device, press Aux OFF [OFF],
enter the number of the auxiliary you would like to deactivate and then press [Enter].
Instruction Manual
LTC 8600 | LTC 8800 Series
M
indicating the monitor is locked. This status
L
F.01U.127.393 | 2.0 | 2009.03