Video Monitor Display; Time/Date - Bosch LTC 8600 Instruction Manual

LTC 8600 | LTC 8800 Series

13 Video Monitor Display

NOTE
NOTE

13.1 Time/Date

F.01U.127.393 | 2.0 | 2009.03
The Allegiant Series systems feature an integral text overlay with two or three rows
of 24 characters each. There are over 2000 different characters that can be dis-
played. See Chapter 20, "Character ROM Tables for LTC 8600 and LTC 8800," on
page 86
If no video signal is present, a new line will appear stating: VIDEO NOT PRESENT.
The display is broken down into seven areas as shown in the figure
User-selectable
2-digit "Site"
Number Mode
xx
XXXX Status/Title
Camera Title
Camera
Number
Extended Camera Title/Monitor Title
16-character
Camera Title
The Monitor Overlay Display shows all six digits including leading zeros for a camera
number in 6-digit mode. In 4 digit mode, the camera number display depends on
the setting of the Miscellaneous Parameter option as set in the Master Control Soft-
ware.
The time/date display is generated by the system CPU microprocessor module. It is
crystal controlled and battery protected for one year (minimum) without power. The
display is updated once per second and all monitors update simultaneously. The
time/date message is always on the right side of the video display with the time on
the top line. Time displays hours, minutes, and seconds, and can be set to either 12-
hour or 24-hour operation. The date is available in three (3) user-selectable formats:
1.
U.S. Format - The order for the American date display is: MM/DD/YY.
(Default for 120 VAC systems)
2.
International Format - The order for the international date display is:
DD/MM/YY (Default for 220-240 VAC systems)
3.
Asian Format - The order for the Asian date display is: YY/MM/DD
12-character System
Status Display or
Monitor Title
User-selectable
Third Line Mode
Figure 18: Monitor Overlay Display
Instruction Manual
en | 45
12- or 24-hour
Time Display
3 Selectab
12:00:00
Formats:
(MM-DD-Y
11-26-90
DD-MM-Y
YY-MM-D
Bosch Security Systems, Inc.