Instructions For Use; Power Supply And Input Voltage - Bosch rexroth HMS01 Instruction Manual

IndraDrive Drive Controllers Power Sections HMS01
4

Instructions for use

4.1

Power supply and input voltage

Power sections HMS and HMD are only to be used in conjunction with listed
(NMMS) DC power supply units like HMV, which are capable of delivering the
rated input current for the applicable power section. Branch circuit protection
has to be provided externally according to the maximum values (voltage and
current), which are mentioned in the supply unit manual (Project Planning
Manual).
Instructions for use
R911319996_Edition 08 Bosch Rexroth AG
19/27