Mark Levinson 31 Manual page 4

4
2 display intensity
Pressing this button varies the brightness of the Display. Four
brightness levels are available.
When the Nº31's main power switch is first turned on (or when
power is restored after an interruption), the Display is automatically
set to its second-brightest level.
Pressing display intensity once dims the Display one level; pressing
it again dims it further; pressing it again turns the Display off.
Pressing display intensity once more returns the Display to its
brightest level.
display intensity also affects the Nº31's front-panel LEDs. When the
Display is turned off, however, the LEDs still glow dimly.
3 Top-panel controls
See "Top panel."
4 Display
See "Display."
5 display mode
This button allows you to change the type of information shown in
the time part of the Display. (See "Display.")
When a CD is loaded and ready for play, the time part of the
Display shows the time remaining on the CD; the time remaining
and on disc LEDs are lighted.
Press display mode to change the time part of the Display:
time remaining on track
The information in the time part of the Display corresponds to the
lighted LEDs to the right of the display mode button. After play
begins, the Display will reflect the last display mode you selected.
Along with program
button is also used to change the link settings. (See "Linked
functions.")
time remaining on disc
display
mode
elapsed time on track
+ –
(13) and program
elapsed time on disc
(14), the display mode