Mark Levinson 31 Manual page 13

Display messages The Display also shows messages about the Nº31's status and
operation. Here are some of the messages you'll see, and what they
mean.
CLOSING: The LID is in motion (closing); appears after the
LID Open/Close button is pressed.
FIRST TRACK: The Previous button was pressed while the first track
on the CD (or in a program or a random sequence) was playing.
INDEX SEARCH: The Nº31 is scanning the CD for indexes; appears
after index mode is pressed.
INSERT DISC: The LID is open; appears after the LID has stopped
opening.
LAST TRACK: The Next button was pressed while the last track on
the CD (or in a program) was playing.
NEW PROGRAM: A new program was recorded in the Nº31's
memory; appears after program save is pressed.
NO DAMPER: The LID is closed and the Disc Damper isn't installed
on the spindle; appears after the LID has closed.
NO PROGRAM: There's no program in the Nº31's memory;
appears after program review or program clear is pressed.
OPENING: The LID is in motion (opening); appears after the
LID Open/Close button is pressed.
P01 IS 1st: Indicates a track's place in a program; appears after
program review is pressed.
P02 02 IS 2: Indicates an index's place in a program; appears
after program review is pressed.
PROG CHANGED: Changes to a program were recorded in the
Nº31's memory; appears after program save is pressed.
POLARITY PRG: A program including only the polarity invert
function was saved; appears after program save is pressed.
PROG DELETED: A previously saved program was erased from the
Nº31's memory; appears after program clear is pressed, followed
by pressing program save.
PROG CLEARED: The temporary program was erased, or the
previously saved program was temporarily overridden; appears
after program clear is pressed.
PROGRAM END: There are no more selections in the program
being reviewed; appears after program review is pressed.
READING: The Nº31 is reading track and time information from
the CD; appears after the LID has closed.
13