Mark Levinson 31 Manual page 12

12
track
1
Display
1 track
Before play begins, this part of the Display shows the total number
of tracks on the CD.
During play, this part of the Display shows the number of the track
in play.
While a program is in the Nº31's memory, the letter P will appear
preceding the track number. A small
setting (possible only when the Nº31 is linked to a compatible Mark
Levinson digital processor).
While random play is active, the letter R will appear preceding the
track number.
While repeat A>B is active, the letters A then B will alternate
appearing in the space preceding the track number.
While Pause is active, " will appear preceding the track number
(as pictured above).
While preview is active, the track part of the Display will flash.
2 index
If a CD includes indices, this part of the Display shows the index in
play, beginning with 01 and increasing as the CD plays. If the CD in
play doesn't include indexes, this part of the Display shows 01
throughout play. For information on how to use indexes, see "Basic
operation."
Tracks may also be played from Index 00. (See "Linked functions.")
3 time
Before play, this part of the Display shows the total playing time for
all tracks on the CD. When play begins, this part of the Display
shows time-related information about the CD or the track.
You may vary the information in this part of the Display using the
display mode button. (See "Front panel.")
4 Remote sensor
This part of the Display accepts commands from the Nº31's Remote
Control. (See "Remote Control.") Always keep this window clean
and unobstructed.
index time
2 3
indicates a saved polarity
P
4