Mark Levinson 31 Manual page 15

To select a one-digit track or index number, you may press either
one or two buttons. For example, for track 1, you may enter either
1 or 01. To select a two-digit track number, enter both digits. Track
numbers you select will appear in the track part of the Display;
index numbers you select will appear in the index part of the
Display.
Entering a number before play begins play with that track or index
and plays the remaining tracks as ordered on the CD.
Entering a number during play skips to that track or index and
begins play, then plays the remaining tracks as ordered on the CD.
The numbered buttons may also be used to begin play at a
specific time; see prg/time (3). In this case, the numbers you select
will appear in the time part of the Display.
3 prg/time
This function, used with the numbered buttons (2), allows you to
begin play at a specific time — whether or not it corresponds to an
index. Used with the
or erase selections from a program via the Remote Control.
To begin play at a specific time, use Next or Previous (or the
numbered buttons) to select a track. Press prg/time, then press the
numbered buttons corresponding to when you'd like play to begin.
(The numbers you select will appear in the time part of the
Display.) To begin play at that point, press Play.
Note: The time you select depends on the selection you've
made with the display mode button: elapsed or remaining,
CD or track.
For example, if you want to begin play one minute and thirty
seconds into track 2, first press display mode until the
elapsed time and on track LEDs light. Then select track 2 by
pressing Next or Previous (or by entering 02). Press prg/time,
enter 130, then press Play.
To add or erase selections from a program, first select a track. Press
prg/time, then press
(See "Programming.")
4 d/a polarity
Some recordings simply "sound better" when polarity is inverted.
When the Nº31 is linked to a compatible Mark Levinson digital
processor (via their communication ports), pressing this button
inverts polarity on the digital processor. (See "Rear panel" and
"Linked functions.")
+ –
and buttons, prg/time allows you to add
+
to add a selection or
–
to erase a selection.
15