Mark Levinson 31 Manual page 38

Reviewing a program
Erasing a selection
from a program
38
5. When you've finished eliminating tracks:
a. If you want to play your program without recording it in the
Nº31's memory, go on to step 6.
b. If you want to record your program in the Nº31's memory, press
program save; the Display will show NEW PROGRAM.
6. To play the program, press Play.
To review your program before playing it:
1. Load a CD for which you've already saved a program (the letter P
will appear preceding the track number on the Display); or load
an unprogrammed CD, then assemble and save a program.
2. Press program review. The Display will show the first selection in
your program.
For example, if track 3 is the first selection in your program, the
Display would show P03 IS 1st. If index 2 on track 5 is the first
selection, the Display would show P05 02 IS 1.
Note: If you press program review when there is no program
in the Nº31's memory, the Display will show NO PROGRAM.
3. To view the next selection, press program review again, and so
on.
Press program review for each selection in your program. After
you view the last selection, the Display will show PROGRAM END.
You may erase any selection from a previously saved program. To
erase a selection:
1. Load a CD for which you've already saved a program (the letter P
will appear preceding the track number on the Display); or load
an unprogrammed CD, then assemble and save a program.
2. Press program review. The Display will show the first selection in
your program.
3. Press program review until the selection you want to erase
appears on the Display.
–
4. Press program (on the Remote Control, press prg/time, then
–
press ); the Display will show the track you erased, along with
PRG –.
5. Repeat steps 3 and 4 for each selection you want to erase from
your program.
When you finish erasing selections from your program, press
program save; the Display will show PROG CHANGED.