Hardware Features; Fiber Optic Ports - Allied Telesis AT-8016F/MT Installation Manual

Product Description

Hardware Features

Fiber Optic
Ports
The following sections describe these hardware features of the AT-8000
Series Fast Ethernet Switches:

# Fiber Optic Ports

# Twisted Pair Ports
# Gigabit Interface Converter (GBIC) Expansion Slots
# Module Expansion Slots
# Twisted Pair Port LEDs and the LED Mode Select Button
# Fiber Optic Port LEDs
# System LEDs
# RS-232 Terminal Port
# Reset Button
# RPS Connector
# AC Power Connector
Systems
# AT-8016F/SC
# AT-8016F/MT
# AT-8026FC
Description
The AT-8016F/SC and AT-8016F/MT Switches feature 16 fiber optic ports.
The AT-8026FC Switch has two fiber optic ports in additional to its
standard 24 twisted pair ports. The operating characteristics of the fiber
optic ports on the three switches are the same.
Type of Connector - The sixteen fiber optic ports on the AT-8016F/SC
switch and the two fiber optic ports on the AT-8026FC switch have dual
SC connectors. The fiber optic ports on the AT-8016F/MT uses MT-RJ
connectors.
Speed - The ports have a fixed operating speed of 100 megabits per
second (Mbps). The speed cannot be changed.
Duplex Mode - The fiber optic ports can operate in either half- or full-
duplex mode. You can set the duplex mode manually or allow the switch
to set it automatically through Auto-Negotiation.
18