Installing An Optional At-Rps3004 Redundant Power Supply - Allied Telesis AT-8016F/MT Installation Manual

Installing an Optional AT-RPS3004 Redundant Power Supply

Systems
# AT-8016F/MT
# AT-8016F/SC
# AT-8024M
Procedure
This section describes how to install the optional AT-RPS3004 external
power supply.
The AT-RPS3004 can supply redundant power for up to four Ethernet
switches. Initially, it contains one pre-installed AT-PWR3004 module. You
can purchase additional power modules from your Allied Telesyn
representative. Each additional AT-PWR3004 module comes with a DC
power cord.
Make sure the following hardware components are included in your
power supply package. If any item is missing or damaged, contact your
Allied Telesyn sales representative for assistance.
# One AT-RPS3004 Power Supply Unit
# Two mounting brackets
# AC Power cord (Americas, EC, Australia, and UK only)
# 16-pin Molex DC Power Cord
(Americas, EC, Australia, and UK only)
# Installation Guide
# Warranty card
AT-8000 Series Fast Ethernet Switches Installation Guide
63