Unpacking the Switch
To unpack the switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesyn.
2. Place the switch on a level, secure surface.
3. Make sure the following hardware components are included in your
switch package. If any item is missing or damaged, contact your Allied
Telesyn sales representative for assistance.
# One AT-8000 Series Fast Ethernet Switch
# Two mounting brackets
# Eight flathead Phillips screws
# Power cord (Americas, EC, Australia, and UK only)
# Documentation CD
# Warranty card
AT-8000 Series Fast Ethernet Switches Installation Guide
55