Fiber Optic Port Leds - Allied Telesis AT-8016F/MT Installation Manual

Product Description
Fiber Optic Port
LEDs
Table 3 AT-8016F/MT and AT-8016F/SC Fiber Optic Port LEDs
LED
L/A
D/C
Systems
# AT-8016F/MT
# AT-8016F/SC
# AT-8024GB (GBIC slots)
# AT-8026FC
Description
The fiber optic ports on the AT-8016F/MT and AT-8016F/SC Switches
have two LEDs, labeled L/A and D/C. The LEDs are defined in Table 3.
State Description
OFF Indicates that there is no link between the port
and the end node.
Solid Green Indicates a valid link has been established
between the port and the end node.
Flashing Green Indicates that the port is transmitting and/or
receiving data packets.
Solid Green Indicates that the port is operating in full-duplex
mode.
Solid Amber Indicates that the port is operating in half-duplex
mode.
Flashing Amber Indicates that data collisions are occurring on the
port.
Note
The AT-8016F/MT and AT-8016F/SC Switches do not have a LED
Mode Select Button.
24