Editing For Memory Points; Changing The Name Of A Memory Point Or; Inputting A Phone Number; Deleting The Memory Points - Alpine NVD-T003 Owner's Manual

Editing for Memory Points

OK
MENU RTN
Changing the Name of a Memory
Point or Inputting a Phone Number
When a point is registered, the name of the point will be
stored automatically. Use when you edit a stored name
of the point or phone number.
1
Press the MENU button to display "NAV.MENU."
2
Select "NAVI Setup" from "NAV.MENU" by moving the
Flipper switch up or down. Press the OK button or
MODE knob to execute the selection.
3
Select "Memory Points" from the "NAVI Setup" menu
by moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
Select your desired point to edit from the "Memory
Points" list and press the OK button or MODE knob to
execute the selection.
5
The displayed screen changes to the "Edit Memory
Point" menu. Select "Edit Memory Point" from the
menu and press the OK button or MODE knob to
execute the selection.
Execute name change or phone number input.
Change Phone No.:
Move the cursor to this menu and execute the
selection. The numeric input pallet appears. Input the
desired number.
Change Name:
Move the cursor to this item and execute the
selection. The character input pallet appears. After
selecting with the cursor (
characters, input the desired characters.
(If more than 14 characters have been input, the
character pallet disappears. If selecting with the
cursor ( ), and deleting inputted characters, the
character pallet reappears.)
20
-EN
MODE Flipper switch
), and deleting inputted
6
To return to the previous screen, press the RTN button.
To return to the "NAV.MENU" screen, press the MENU
button.

Deleting the Memory Points

You can store up to 50 locations in memory. You can
erase any of the locations as and when you like.
1
Press the MENU button to display "NAV.MENU."
2
Select "NAVI Setup" from "NAV.MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Memory Points" from the "NAVI Setup" menu
by moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
Select your desired point to erase from the "Memory
Points" list and press the OK button or MODE knob to
execute the selection.
5
The displayed screen changes to the "Edit Memory
Point" menu. Select "Delete" from the menu and press
the OK button or MODE knob to execute the selection.
6
The confirmation message appears. Select "Yes" and
press the OK button or MODE knob to execute the
selection.
7
To return to the previous screen, press the RTN button.
To return to the "NAV.MENU" screen, press the MENU
button.