Graphics Accelerator Driver - NEC Express5800 120Li User Manual

Graphics Accelerator Driver

The graphics accelerator driver will be automatically installed by Express Setup or system update.
NOTE:
accelerator driver is deleted, and reinstalled after OS is installed.
<About the driver of graphics accelerator (N8105-45)>
When graphics accelerator (N8105-45) board is installed or it separates, the deletion of the graphics
accelerator driver which has already been installed is necessary.
The procedure is as follows.
1.
Click Start menu, point to [Setting] and click [Control Panel].
2.
Click [Add/Remove Programs].
3.
Select the graphics accelerator driver from the program list and click "Change/Remove".
To delete a standard graphics accelerator driver, select:
[Matrox Graphics Software (remove only)]
To delete a graphics accelerator (N8105-45) driver, select:
[ATI Display Driver]
NOTE:
already been installed.
4.
Follow the message to continue the uninstallation and restart the system.
5.
Installing graphics accelerator driver.
Manually installation:
Make installation in the way of "Reinstallation of graphics accelerator driver"
Automatic installation:
You should execute the system update again referring to "Updating the system".
End of installation.
Please refer to the following < reinstalling > when the graphics
Please choose the graphics accelerator driver which has
Installing Windows Server 2003 E-15