NEC Express5800 120Li User Manual page 152

6-8 Installing and Using Utilities
– FDISK
Execute FDISK command of ROM-DOS system. You can create/delete partitions, etc.
System Management
The parameters of BMC (Baseboard Management Controller) are set for remote control
and alert.
BIOS/FW/etc. Update
This menu allows you to update the software module such as BIOS and firmware of the
server by using the update disk (3.5-inch floppy disk) that is distributed from NEC
customer service representative.
After rebooting the system, an update program is started automatically from the floppy
disk, and the various BIOS and firmware programs are updated.
IMPORTANT: Do not turn off the server while the update program is
running. If the update processing is discontinued, the system becomes
unable to start.
Help
Displays explanations about various functions of NEC EXPRESSBUILDER.
Return to the Top Menu
Choosing this menu returns to the Top Menu.