NEC Express5800 120Li User Manual page 105

7.
Press F10 to create logical drive.
The "Logical Drives Configure" screen appears. (The figure below shows an example of
RAID5 configured with three hard disk drives.)
8.
Select "RAID," "Size", "WC", "RA", "Stripe Size", or "Span" by using cursor keys. Then
press Enter to fix the selection and set each value.
(1) "RAID": Sets RAID level.
Parameter
0
1
5
10
The selectable RAID level varies depending on the number of hard disk drives
that configure a pack.
(2) "Size": Sets logical drive size.
Up to 40 logical drives can be created per disk array controller.
(3) "WC": Sets parameter for Change Write Cache.
Parameter
Off
On
(4) "RA": Sets parameter for Change Write Cache.
Parameter
Off
On
(5) "StripeSize": Sets stripe size.
Configuring Your Server 4-39
Remarks
RAID0
RAID1
RAID5
Spanning of RAID1
Remarks
–
–
Remarks
–
–