Table of Contents
Advertisement
The table below shows the operation when the AC power to the server is turn off once and then on
again, depending on the setting of "AC LINK."
System status before AC power off
Operating
Aborting (DC power being off also)
Forced shutdown
* Press the power switch continuously for four seconds or longer. This forcibly turns off the power.
IMPORTANT:
To power on the server from the UPS (Uninterruptible Power
Supply), select [Server] - [AC Link] - [Power On].
If the server is connected to the UPS, set at least 10 seconds delay in
the power-on schedule.
Configuring Your Server 4-23
Setting of AC LINK
Stay Off
Last State
Off
On
Off
Off
Off
Off
Power On
On
On
On
Advertisement
Table of Contents
Troubleshooting
