NEC Versa 2700 User Manual page 40

!
CAUTION
This equipment uses an ungrounded power cable.
Replace the cord if it becomes damaged. U.S. and
Canadian replacement cords must be UL-approved
(CSA certified in Canada) type SPT-2, 18 AWG, 2-
conductor cord with a permanently attached NEMA
type 5-15P plug at one end, and a permanently at-
tached connector body on the other. Cord length
may not exceed 15 feet.
Outside the U.S. and Canada the cord must be
rated for at least 250VAC at 10 amps, and must in-
dicate international safety agency approval. The
plug must be a type appropriate for the country
where it is used. Check with your local dealer for
HAR type 18 AWG, 2 conductor cord, or better.
(Reference the booklet, "Getting Service and Sup-
port for Asia, Australia, and Europe" to find out how
to contact the local office in your country.)
Obtain replacement cords at an authorized service
center. The replacement must be of the same type
and voltage rating as the original cord.
Disconnect all supply lines before the hinged front
cover is removed. Replace the hinged front cover
before the unit is restarted.
Getting Started 1-27