NEC Versa 2700 User Manual page 95

Follow these steps to enable the IR port using the setup
utility.
Enter the setup utility as indicated in Chapter 3, "Using
1.
Setup and Power Management."
2. Select Peripherals Setup.
Use the
3.
Press
4.
Save settings and exit.
5.
NOTE
external device when a PC card is installed, use the
Windows 95 device manager to disable either the
USB port or the 56K internal modem (modem only
available on some models). Ensure that the IR port
has been enabled through the setup utility.
To take advantage of the FIR transfer rate, disable
the 56K internal modem.
For information about enabling and disabling de-
vices on your NEC Versa, see "Enabling and Disa-
bling Devices," later in this chapter.
For the infrared technology to work, follow these guidelines:
T
position the NEC Versa no more than three feet way
from the IR peripheral device you are using, and
T
keep the IR ports between the computer and the device
parallel.
The LapLink software that ships with your NEC Versa
system provides ways for you to use the IR port. Read the
instructions "How to Use LapLink" in Chapter 2.
4-20 Using Your NEC Versa
feature to set the IR port to AUTO.
PgDn
to exit Peripherals Setup.
Esc
To use the IR port to communicate with an