Usb Port; Enabling And Disabling Devices - NEC Versa 2700 User Manual

USB Port

The USB Port on the left side of your system allows you to
connect up to 127 USB equipped peripheral devices to your
NEC Versa notebook computer. These peripherals may in-
clude digital cameras, scanners, printers, CD-ROM drives,
modems, keyboards, telephones, and games devices.
USB devices called USB hubs can serve as connection ports
for other USB peripherals. Only one device needs to be
plugged into your NEC Versa. Additional peripherals can
be connected in a daisy chain configuration where one
device is connected to another in a series. Up to 127 USB
devices can be connected together in this way.
NOTE
NEC Versa that displays the USB icon.
Depending on your operational requirements, you
may need to disable the USB port in order release
system resources to use other devices.
For information about enabling and disabling
devices on your NEC Versa, see "Enabling and
Disabling Devices," later in this chapter.

ENABLING AND DISABLING DEVICES

Depending on your operational requirements you may need
to enable and disable devices on your NEC Versa to opti-
mize system resources.
Follow these steps to enable or disable a device on your
NEC Versa:
Press Start, slide the cursor to Settings, and locate the
1.
Control Panel.
Connect the USB device to the port on your
Using Your NEC Versa 4-21