NEC Versa 2700 User Manual page 17

NOTE
inch Thin Film Transistor (TFT) LCD panel have a
brightness control switch only. Increasing the bright-
ness increases the screen contrast.
T
Power and Suspend Status LEDs — (identified by
icons) are located just under the front of the LCD panel.
The status LEDs are duplicated on the back of the LCD
panel to allow viewing when the panel is closed.
1-4 Getting Started
NEC Versa models equipped with the 12.1-
Battery
Power Charging
LED LED
Power LED — lets you know that power to the sys-
tem is turned on. This LED is positioned so that you
see the power state whether the LCD panel is opened
or closed.
– Lights green when the system is powered on us-
ing the AC Adapter or Xtender Airplane & Auto
Adapter.
– Lights amber when the system is powered on us-
ing the battery.
– Slowly blinks amber when the system is powered
on using a battery at 5-8% capacity.
– Quickly flashes amber when the system is pow-
ered on using a battery at 4% or less capacity.
Suspend
Mode
LED
Power and Suspend LEDs