Features; Remote Display - Fluke 381 User Manual

381
Users Manual
off and on, the user is encouraged to try to correct the interference by one or more of the
measures that follow:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
The term "IC:" before the radio certification number only signifies the device meets Industry's
Canada technical specifications.

Features

The following sections explain the Meter features in detail. See Figure 2 and Table 2.

Remote Display

The Meter uses low-power 802.15.4 wireless technology to let the display module operate in a
different location than the Meter base. Although there is control of some Meter functions (Hold,
MIN MAX AVG, and Backlight), complete remote control of the Meter is not available through the
display module.
The wireless radio signal does not hinder Meter measurements. Usually, the radio signal is off
when the display module is docked to the Meter base. It is possible for the radio signal to be on
when the display module is docked and the Rotary Function Switch is set to OFF. To make sure
that the radio signal is off, remove the batteries from the Meter base and display module.
The display module is synchronized with a Meter base when it is docked on the Meter base and
turned on. Different display modules can be synchronized with a Meter base but, only one display
module can be synchronized to a Meter base at the same time.
8