Nokia NPS6113000 - Secure Access System Getting Started Manual page 24

Installing the Nokia Secure Access System Gateway
The resulting page advances you to the Nokia Network Voyager Web server on the new
port, which is either 8080 or 8443.
6. If necessary, log on to Network Voyager again by using the username admin and the same
administrator password as before.
Note
When cookie-based session management is enabled in Network Voyager, you can
select Acquire Exclusive Configuration Lock when you log on to Network Voyager. If you
acquire this lock before you install and enable the Nokia Secure Access System
package, the lock does not clear when the Network Voyager Web server port switches
from port 80 to 8080, or from port 443 to 8443. When you log on to Network Voyager
after the port change, the error message "Could not acquire exclusive configuration
lock" appears. If this occurs override the lock by clicking Log In with Advanced Options
and select Yes for Override Locks Acquired by Other Users.
The Nokia Secure Access System page now shows that the status is enabled. You can now
sign on to the Nokia Secure Access System gateway. Continue to
Gateway as the Administrator"
24
If the status is enabled, click the Click here to sign onto NSAS link and continue to
authenticate at the Sign-on page"
If the status on this page shows as disabled, click:
Click here to initialize the Nokia Secure Access System
on page 29.
on page 27.
Nokia Secure Access System Getting Started Guide
"To
"Signing On to the