Installing The Hardware; Initial Configuration; About The Nokia Ipso Operating System; Performing Initial Configuration - Nokia NPS6113000 - Secure Access System Getting Started Manual

Installing the Hardware

For information about how to install the hardware and how to physically connect your device to
the network, see the documentation for your specific device. For example, if you are installing a
Nokia IP350 security platform, see the installation guide included with your appliance.

Initial Configuration

This section describes how to perform initial configuration of the Nokia IP security appliance,
and configuring Nokia Voyager settings.
Note
If your appliance was preconfigured, skip the following sections and proceed to
to the Gateway as the Administrator"

About the Nokia IPSO Operating System

Nokia IP security platforms are based on the Nokia IPSO operating system. The Nokia Secure
Access System software is installed as a package on the Nokia IPSO appliance. Configure your
appliance before you install the Nokia Secure Access System package.
For more information about configuring IPSO, see the Nokia Voyager Reference Guide.

Performing Initial Configuration

This section describes how to perform initial configuration of the Nokia IP security platform.
The first time you supply power to your Nokia appliance, the initial configuration process
begins. This process enables you to configure the network settings and provides access to the
admin account.
You can perform the initial configuration in two ways:
You can configure a DHCP server to provide the initial configuration information the first
time the appliance is started.
You can perform the initial configuration manually by using a console connection. Connect
the supplied null-modem cable (console cable) to the DB9 port labeled Console and connect
the other end of the cable to a system running a terminal-emulation program.
Specify the following information:
Nokia Secure Access System Getting Started Guide
Hostname of the appliance.
Use a fully qualified domain name, such as gateway.example.com.
Initial password for the administrator account.
Username is admin.
on page 27.
Installing the Hardware
"Signing On
13