Use your fax program's settings menu to select your Nokia phone as the active fax modem.
Hardware setup
Use the modem properties dialog box of your fax software to confirm the following settings:
• Communications port - COMn (where n=COM port number assigned to your phone)
• Initialization - 19200 bps
• Modem type - Class 2.0
• Flow control - Hardware
Notes about digital data and fax calls
by pressing your phone's
• Avoid terminating a call
and could cause loss of data.
• Data or fax calls cannot be initiated using your phone's keypad. All digital data and fax calls must be initiated using the data
or fax software.
• Any touch tones (DTMF tones) needed for calling cards, special long-distance access numbers, etc. must be programmed into
the dialing string.
key. This may cause your data or fax application to temporarily lock up
[ 35 ]
Configure your data and fax software
9