Adding An Expansion Card - Gateway E3400 System Manual

Adding an expansion card

The riser card has five PCI slots, four of which are available for expansion
cards (one is used by the LAN card).
A card alignment guide attached to the riser card helps you align PCI cards
in the slots.
To add a PCI expansion card:
1
Set any jumpers and switches on the card (see the card documentation
for instructions).
2
Turn off the computer, disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
3
Open the right panel (see "Removing the side panels" on page 19 for
more information, and observe the "Static electricity precautions" on
page 17.)
4
Locate an available slot.
46
Replacing and Adding System Components