Gateway E3400 System Manual page 43

7
Place the new drive into the drive cage. Make sure the threaded holes
on the drive align with the locking tab holes on the drive cage.
5.25-inch
device
8
Replace the drive locking tab.
9
Connect the power and data cables to the drive.
10
Push the release button in and slide the drive cage back into the chassis
until the button snaps into the rear locking hole.
11
Replace the right panel. (See "To replace the right panel:" on page 24.)
12
Reconnect the power cord and all other cords you removed, then turn
on the system.
36
Replacing and Adding System Components