Connecting To A Wired Ethernet Network - Gateway E-4300 User Manual

Connecting to a wired Ethernet network

Your computer has a network jack that you can use to connect to a 10/100 wired Ethernet
network.
Important
To connect to a wired Ethernet network:
1
Insert one end of the network cable into the network jack
computer.
2
Insert the other end of the network cable into a network jack.
Tips & Tricks
Your computer is equipped with a built-in Ethernet port.
For information about setting up a wired or wireless Ethernet network,
see "Networking Your Computer" on page
You can use your computer's Ethernet jack for more than just
networking. Many broadband Internet connections, such as cable
modems and DSL modems, connect to your computer's Ethernet
jack. For more information, see "Using the Internet" in Using Your
Computer which has been included on your hard drive. To access this
guide, click Start, All Programs, then click Gateway
Documentation.
www.gateway.com
85.
on the back of your
33