Gateway E-4300 User Manual page 107

Connecting to an access point network
After you have set up your wireless access point, you need to set up the network connection
on your computers.
To connect to an access point wireless Ethernet network:
1
Before connecting to an access point, you must turn on the wireless Ethernet emitter
by clicking
Control Panel is in Category View, click
and Internet Connections window opens.
2
Click/Double-click
3
Right-click the
. The Choose a wireless network window opens.
networks
4
Click the network you created in the Choose a wireless network list, then click
Follow the onscreen instructions to complete the wireless network connection.
-OR-
If you are unable to connect to the network in the Choose a wireless network list,
click the
Learn about wireless networking
, then clicking
Start
Network Connections
Wireless Network Connection
www.gateway.com
. The Control Panel window opens. If your
Control Panel
Network and Internet Connections
. The Network Connections window opens.
icon, then click
topic located in the Related Tasks area.
. The Network
View available wireless
Connect
.
101