Gateway E-4300 User Manual page 15

Component
Power connector
Voltage switch
PS/2 keyboard port
Serial port
Monitor port
Microphone jack
(red or pink)
Headphone/
speakers (line out)
jack (green)
Audio input (Line
in) jack (blue)
USB ports
Telephone jack
(optional)
Case cover
shipping
thumbscrew
Icon Description
Plug the power cord into this connector.
Before turning on your computer, make sure that this switch is
in the correct position for the correct power available. The
switch is preset at the factory with the correct voltage for your
area.
In the United States, the utility power is supplied at a nominal
115 volts at 60 Hz. The power supply should always be set to
this when your computer is operating in the United States. In
other areas of the world, such as Europe, the utility power is
supplied at 230 volts at 50 Hz. If your computer is operating
in an environment such as this, the voltage switch should be
moved to 230.
Plug a Personal System/2
Plug a serial device (such as a digital camera) into this port.
For more information, see
peripheral device" on page
Plug a monitor into this port.
Plug a microphone into this jack.
Plug powered speakers, an external amplifier, or headphones
into this jack.
Plug an external audio input source (such as a stereo) into this
jack so you can record sound on your computer.
Plug USB (Universal Serial Bus) devices (such as a printer,
scanner, camera, keyboard, or mouse) into these ports. For
more information, see
peripheral device" on page
If your modem has a telephone jack, plug the cable for a
telephone into this jack.
Remove this screw before opening the case.
www.gateway.com
®
(PS/2) keyboard into this port.
"Installing a printer, scanner, or other
34.
"Installing a printer, scanner, or other
34.
9